ElectroScience - Thick-Film Materials & Ceramic Tapes Logo

Wideband Sensor

Product Purpose PDF Datasheet Add to
Quote
4569

A porous zirconia paste that is designed for use in as a protective overcoat for platinum electrodes in planar oxygen sensors. This material is co-fired with zirconia tape and platinum between 1,450°C and 1,500°C.

4569 Datasheet Add 4569 to RFQ
4441

A fugitive paste that is designed to form channels in multi-layer tape structures. This material can also be used to increase post fired porosity when mixed with other inks.

4441 Datasheet Add 4441 to RFQ
4492

An alumina dielectric that is designed for use as an insulating layer in planar oxygen sensors. This material is co-fired with zirconia tape and platinum between 1,450°C and 1,500°C.

4492 Datasheet Add 4492 to RFQ
5559-B

A platinum paste designed to be co-fired with high temperature ceramic tape to create a high resistance heater. This material is co-fired with alumina or zirconia between 1450°C to 1550°C.

5559-B Datasheet Add 5559-B to RFQ
5575

A platinum paste designed to be co-fired with high temperature ceramic tape to create a via conductors for planar oxygen sensors. This material is co-fired with alumina or zirconia between 1450°C and 1550°C.

5575 Datasheet Add 5575 to RFQ
5570

A porous platinum paste designed to be co-fired with zirconia ceramic tape to create the inner and outer electrode in planar oxygen sensors. This material is co-fired with zirconia between 1450°C and 1550°C.

5570 Datasheet Add 5570 to RFQ
5571

A platinum paste designed to be co-fired with high temperature ceramic tape to create a resistance heater in planar oxygen sensors. This material is co-fired with alumina or zirconia between 1450°C and 1550°C.

5571 Datasheet Add 5571 to RFQ
5572

A platinum paste designed to be the inner electrode in conical oxygen sensors. This material is fired between 1250°C and 1500°C on partially stabilized zirconia substrates.

5572 Datasheet Add 5572 to RFQ
5573

A platinum paste designed to be the outer electrode in conical oxygen sensors. This material is fired between 1250°C and 1500°C on partially stabilized zirconia substrates.

5573 Datasheet Add 5573 to RFQ
5574

A platinum paste designed to be co-fired with high temperature ceramic tape to create a conductor leads for planar oxygen sensors. This material is co-fired with alumina or zirconia between 1450°C and 1550°C.

5574 Datasheet Add 5574 to RFQ
6642

A RoHS compliant palladium paste designed for use on partially stabilized zirconia (PSZ) for use in oxygen sensors. This material is fired between 1250°C and 1450°C.

6642 Datasheet Add 6642 to RFQ
5542

A fritless platinum paste designed to be the inner and outer electrodes in conical oxygen sensors. This material is fired between 950°C and 1300°C on partially stabilized zirconia substrates.

5542 Datasheet Add 5542 to RFQ