ElectroScience - Thick-Film Materials & Ceramic Tapes Logo

Al203

Product Purpose PDF Datasheet Add to
Quote
NTC-2114

A negative thermistor paste designed with a beta of 2,125 and a resistivity of 10,000 ohm/sq. This material is fired on alumina at 850°C.

NTC-2114 Datasheet Add NTC-2114 to RFQ
NTC-2115

A negative thermistor paste designed with a beta of 2,500 and a resistivity of 100,000 ohm/sq. This material is fired on alumina at 850°C.

NTC-2115 Datasheet Add NTC-2115 to RFQ
NTC-2116

A negative thermistor paste designed with a beta of 3,100 and a resistivity of 1,000,000 ohm/sq. This material is fired on alumina at 850°C.

NTC-2116 Datasheet Add NTC-2116 to RFQ
PTC-2611

A positive thermistor paste with a beta of 4,100 and a resistivity of 10 ohm/sq. This material is fired on alumina at 850°C.

PTC-2611 Datasheet Add PTC-2611 to RFQ
PTC-2650

A positive thermistor paste with a beta of 4,000 and a resistivity of 5 ohm/sq. This material is fired on alumina at 850°C.

PTC-2650 Datasheet Add PTC-2650 to RFQ
NTC-2112

A negative thermistor paste designed with a beta of 725 and a resistivity of 100 ohm/sq. This material is fired on alumina at 850°C.

NTC-2112 Datasheet Add NTC-2112 to RFQ
NTC-2113

A negative thermistor paste designed with a beta of 1,700 and a resistivity of 1,000 ohm/sq. This material is fired on alumina at 850°C.

NTC-2113 Datasheet Add NTC-2113 to RFQ
R-316-B

A ruthenium resistor with a value of 1,000,000 ohm/sq. (TCR +/- 100) This material is designed to fire on alumina at 850°C.

R-316-B Datasheet Add R-316-B to RFQ
R-313-A

A ruthenium resistor with a value of 1,000 ohm/sq. (TCR +/- 50) This material is designed to fire on alumina at 850°C.

R-313-A Datasheet Add R-313-A to RFQ
R-314-A

A ruthenium resistor with a value of 10,000 ohm/sq. (TCR +/- 50) This material is designed to fire on alumina at 850°C.

R-314-A Datasheet Add R-314-A to RFQ
R-314-B

A ruthenium resistor with a value of 10,000 ohm/sq. (TCR +/- 100) This material is designed to fire on alumina at 850°C.

R-314-B Datasheet Add R-314-B to RFQ
R-315-B

A ruthenium resistor with a value of 100,000 ohm/sq. (TCR +/- 100) This material is designed to fire on alumina at 850°C.

R-315-B Datasheet Add R-315-B to RFQ
33101

A silver palladium resistor designed for applications requiring a surge arrest. It has a value of 10 ohm (HTCR of 50ppm, CTCR of 100ppm) This material is designed for use on an alumina or aluminum nitride substrate and can be fired at 850°C.

33101 Datasheet Add 33101 to RFQ
3910-J

A cadmium free, ruthenium based resistor with a value of 1 ohm (TCR of 100ppm) that fires at 850°C.

3910-J Datasheet Add 3910-J to RFQ
3911-J

A cadmium free, ruthenium based resistor with a value of 10 ohm (TCR of 100ppm) that fires at 850°C.

3911-J Datasheet Add 3911-J to RFQ
3912-J

A cadmium free, ruthenium based resistor with a value of 100 ohm (TCR of 50ppm) that fires at 850°C.

3912-J Datasheet Add 3912-J to RFQ
R-311-A

A ruthenium palladium resistor with a value of 10 ohm/sq. (TCR +/- 100) This material is designed to fire on alumina at 850°C.

R-311-A Datasheet Add R-311-A to RFQ
R-312-A

A ruthenium resistor with a value of 100 ohm/sq. (TCR +/- 100) This material is designed to fire on alumina at 850°C.

R-312-A Datasheet Add R-312-A to RFQ
33050

A silver palladium resistor designed for applications requiring a surge arrest. It has a value of 0.50 ohm (HTCR of 50ppm, CTCR of 100ppm) This material is designed for use on an alumina or aluminum nitride substrate and can be fired at 850°C.

33050 Datasheet Add 33050 to RFQ
33100

A silver palladium resistor designed for applications requiring a surge arrest. It has a value of 1.0 ohm (HTCR of 50ppm, CTCR of 100ppm) This material is designed for use on an alumina or aluminum nitride substrate and can be fired at 850°C.

33100 Datasheet Add 33100 to RFQ
33005

A silver palladium resistor designed for applications requiring a surge arrest. It has a value of 0.05 ohm (HTCR of 200ppm, CTCR of 200ppm) This material is designed for use on an alumina or aluminum nitride substrate and can be fired at 850°C.

33005 Datasheet Add 33005 to RFQ
33010

A silver palladium resistor designed for applications requiring a surge arrest. It has a value of 0.10 ohm (HTCR of 50ppm, CTCR of 100ppm) This material is designed for use on an alumina or aluminum nitride substrate and can be fired at 850°C.

33010 Datasheet Add 33010 to RFQ
33020

A silver palladium resistor designed for applications requiring a surge arrest. It has a value of 0.20 ohm (HTCR of 50ppm, CTCR of 100ppm) This material is designed for use on an alumina or aluminum nitride substrate and can be fired at 850°C.

33020 Datasheet Add 33020 to RFQ
33002

A silver palladium resistor designed for applications requiring a surge arrest. It has a value of 0.02 ohm (HTCR of 400ppm, CTCR of 500ppm) This material is designed for use on an alumina or aluminum nitride substrate and can be fired at 850°C.

33002 Datasheet Add 33002 to RFQ
R-310-A

A ruthenium palladium resistor with a value of 1 ohm/sq. (TCR 50 +/- 100). This material is designed to fire on alumina at 850°C.

R-310-A Datasheet Add R-310-A to RFQ
R-315-P

A ruthenium resistor for potentiometer applications with a value of 100,000 ohm/sq. (TCR +/-50). This material is designed to fire on alumina at 850°C.

R-315-P Datasheet Add R-315-P to RFQ
R-316-P

A ruthenium resistor for potentiometer applications with a value of 1,000,000 ohm/sq. (TCR +/-50). This material is designed to fire on alumina at 850°C.

R-316-P Datasheet Add R-316-P to RFQ
R-311-P

A ruthenium palladium resistor for potentiometer applications with a value of 10 ohm/sq. (TCR +/-150). This material is designed to fire on alumina at 850°C.

R-311-P Datasheet Add R-311-P to RFQ
R-312-P

A ruthenium resistor for potentiometer applications with a value of 100 ohm/sq. (TCR +/-50). This material is designed to fire on alumina at 850°C.

R-312-P Datasheet Add R-312-P to RFQ
R-313-P

A ruthenium resistor for potentiometer applications with a value of 1,000 ohm/sq. (TCR +/-50). This material is designed to fire on alumina at 850°C.

R-313-P Datasheet Add R-313-P to RFQ
R-314-P

A ruthenium resistor for potentiometer applications with a value of 10,000 ohm/sq. (TCR +/-50). This material is designed to fire on alumina at 850°C.

R-314-P Datasheet Add R-314-P to RFQ
R-310-P

A ruthenium palladium resistor for potentiometer applications with a value of 1.5 ohm/sq. (TCR +/-150). This material is designed to fire on alumina at 850°C.

R-310-P Datasheet Add R-310-P to RFQ
3414

A Piezo sensitive resistor with a high gauge factor designed for strain gauge and pressure applications. This material can be fired at 850°C.

3414 Datasheet Add 3414 to RFQ
242-SB

A mineral-filled epoxy coating which is solvent resistant even under high pressure This material is thermosetting and cures by cross linking at 150°C.

242-SB Datasheet Add 242-SB to RFQ
4026-A

A sealing glass designed for 96% alumina. When fired between 700°C and 730°C this paste creates hermetic seals with high adhesion.

4026-A Datasheet Add 4026-A to RFQ
4031-B

A sealing glass designed for 96% alumina. When fired between 530°C and 580°C this paste creates hermetic seals with high adhesion.

4031-B Datasheet Add 4031-B to RFQ
240-SB

A mineral filled, thermosetting modified silicone coating that is designed to protect hybrid circuits and printed circuit boards. This material is thermosetting and cures by cross linking at 150°C.

240-SB Datasheet Add 240-SB to RFQ
240-SB-FL

A mineral filled, thermosetting modified silicone coating that has a high viscosity for fine line printing requirements like solder dam printing. This material is thermosetting and cures by cross linking at 150°C.

240-SB-FL Datasheet Add 240-SB-FL to RFQ
4026

A sealing glass designed for 96% alumina. When fired between 550°C and 625°C this paste creates hermetic seals with high adhesion.

4026 Datasheet Add 4026 to RFQ
G-484

A white overglaze paste designed for protection the ESL resistor series including R-300 series and 33000 series. This paste is acid resistant. This material is fired at 600°C.

G-484 Datasheet Add G-484 to RFQ
G-485-1

A acid resistant overglaze with green color designed for use in chip components that require electroplating. This material fires between 525°C and 625°C.

G-485-1 Datasheet Add G-485-1 to RFQ
G-485-2

A RoHS compliant, acid resistant overglaze paste with green color designed for use in chip components that require electroplating. This material fires between 525°C and 625°C.

G-485-2 Datasheet Add G-485-2 to RFQ
G-486-1

An acid resistant overglaze paste designed for use in chip components that require electroplating. This material fires between 525°C and 625°C.

G-486-1 Datasheet Add G-486-1 to RFQ
4903-C

A overglaze designed for use with platinum in high temperature applications . This material fires between 1,250°C and 1,350°C on alumina.

4903-C Datasheet Add 4903-C to RFQ
4771-P2

An RoHS compliant overglaze for resistors that is laser trimmable. When fired between 525°C and 625°C this material is acid resistant for post fired plating applications.

4771-P2 Datasheet Add 4771-P2 to RFQ
4774-BCG

An overglaze for resistors that is laser trimmable. This material can be fired between 525°C and 625°C.

4774-BCG Datasheet Add 4774-BCG to RFQ
4909-MOD

A dielectric paste with high thermal conductivity, high durability and low surface roughness for thermal print heads. This material can be fired at 850°C on alumina.

4909-MOD Datasheet Add 4909-MOD to RFQ
G-481

A overglaze paste with green color designed for protection the ESL resistor series including R-300 series and 33000 series. This paste is laser trimmable and acid resistant. This material is fired at 600°C.

G-481 Datasheet Add G-481 to RFQ
G-482

A overglaze paste with black color designed for protection the ESL resistor series including R-300 series and 33000 series. This paste is acid resistant. This material is fired at 600°C.

G-482 Datasheet Add G-482 to RFQ
4913-G

A RoHS compliant multi-layer dielectric designed for mixed metal conductors. This material is fired at 850°C and 930°C on Alumina.

4913-G Datasheet Add 4913-G to RFQ
4920

A RoHS compliant multi-layer dielectric for applications where a thin layer of dielectric (40 micron or less) is needed. This material is fired between 850°C and 930°C on Alumina.

4920 Datasheet Add 4920 to RFQ
4612-B

A RoHS compliant dielectric paste for fine feature printing. This material is fired on Alumina between 850°C and 930°C.

4612-B Datasheet Add 4612-B to RFQ
4905-C

A dielectric for multi-layer builds using gold and silver based conductors. This material has the ability to create 175 micron x 175 micron vias. When fired between 850°C and 950°C this material yields a dielectric constant (k) between 7-10 kHz and 7-11 MHz on Alumina.

4905-C Datasheet Add 4905-C to RFQ
4905-CH

A dielectric for multi-layer builds using gold and silver based conductors. This material has the ability to create 175 micron x 175 micron vias. When fired between 850°C and 950°C this material yields a dielectric constant (k) between 7-10 kHz and 7-11 MHz on Alumina.

4905-CH Datasheet Add 4905-CH to RFQ
4913

A multi-layer dielectric compatible with a wide variety of conductor systems. This material is fired at 850°C and 930°C on Alumina.

Add 4913 to RFQ
4911

A multi-layer dielectric designed for high frequency, low loss applications. When fired at 850°C on Alumina this material yields a dielectric constant (k) 4.2

4911 Datasheet Add 4911 to RFQ
4917

A RoHS compliant, alkali free cross over dielectric designed for mixed metal conductors systems requiring a high breakdown voltage. This material is fired between 850°C and 930°C on Alumina.

4917 Datasheet Add 4917 to RFQ
4202-C

A capacitor dielectric that when fired between 850°C and 930°C yields a dielectric constant (k) between 1,700-2,300. This material meets the characteristics of X7R.

4202-C Datasheet Add 4202-C to RFQ
4212-C

A capacitor dielectric that when fired between 850°C and 930°C yields a dielectric constant (k) between 10,500

4212-C Datasheet Add 4212-C to RFQ
4113-H

A capacitor dielectric that when fired between 930°C and 980°C yields a dielectric constant (k) between 120-160. This material meets the characteristics of X7R.

Add 4113-H to RFQ
4151

A capacitor dielectric that when fired between 850°C and 930°C yields a dielectric constant (k) between 270 -330. This material meets the characteristics of X7S/X7T.

4151 Datasheet Add 4151 to RFQ
4153

A capacitor dielectric that when fired between 850°C and 930°C yields a dielectric constant (k) between 2,160

4153 Datasheet Add 4153 to RFQ
4117

A capacitor dielectric that when fired between 930°C and 980°C yields a dielectric constant (k) between 270-330. This material meets the characteristics of X7R.

4117 Datasheet Add 4117 to RFQ
4113

A capacitor dielectric that when fired between 930°C and 980°C yields a dielectric constant (k) between 90-130. This material meets the characteristics of X7R.

4113 Datasheet Add 4113 to RFQ
4114

A capacitor dielectric that when fired between 930°C and 980°C yields a dielectric constant (k) between 40-60. This material meets the characteristics of X7R.

4114 Datasheet Add 4114 to RFQ
4115

A capacitor dielectric that when fired between 930°C and 980°C yields a dielectric constant (k) between 15-25. This material meets the characteristics of X7R.

4115 Datasheet Add 4115 to RFQ
9595-A

A silver platinum paste designed for applications requiring a low firing temperature including glass, porcelain enameled steel (PES), and ceramic substrates. This material can be fired as low as 580°C.

9595-A Datasheet Add 9595-A to RFQ
9598-G

A RoHS complaint platinum silver paste designed to be used on alumina. This material fires at 850°C.

9598-G Datasheet Add 9598-G to RFQ
9501-C

A platinum silver that is solderable and wire bondable. This material is fired on alumina at 850°C.

9501-C Datasheet Add 9501-C to RFQ
9501-CH

A platinum silver that is solderable for resistor terminations. This material is fired on steel at 850°C.

9501-CH Datasheet Add 9501-CH to RFQ
9512-G

A RoHS compliant platinum silver paste designed for applications requiring solderability and high conductivity. This material is fired at 850°C on alumina.

9512-G Datasheet Add 9512-G to RFQ
9598

A platinum silver paste designed for use with aggressive solders. This material fires at 930°C.

9598 Datasheet Add 9598 to RFQ
9562-G

A RoHS compliant platinum palladium silver paste designed for use on aluminum nitride where large diameter aluminum wire bonding is required. This material is fired at 930°C.

9562-G Datasheet Add 9562-G to RFQ
9512

A mixed-bonded platinum silver designed for applications requiring solderability and high conductivity.. This material is fired at 850°C on alumina.

9512 Datasheet Add 9512 to RFQ
9516

A platinum silver paste designed to be the electrodes for ESL 4150 Series and 4200-C Series capacitors. This material is fired on alumina at 900°C.

9516 Datasheet Add 9516 to RFQ
9566

A mixed-bonded platinum palladium silver paste designed to be used in mixed metal systems. This material is fired at 850°C.

9566 Datasheet Add 9566 to RFQ
9562

A platinum palladium silver paste designed for use on aluminum nitride where large diameter aluminum wire bonding is required. This material is fired at 930°C.

9562 Datasheet Add 9562 to RFQ
9564

A platinum palladium silver paste designed for applications with aggressive solders. This material is fired at 850°C.

9564 Datasheet Add 9564 to RFQ
9565

A mixed-bonded platinum palladium silver paste designed for use as a resistor termination. This material can be fired at 850°C.

9565 Datasheet Add 9565 to RFQ
9694-SA

A silver palladium paste designed as the resistor termination for potentiometer applications where high throughput production is required. This material is fired at 850°C on alumina.

9694-SA Datasheet Add 9694-SA to RFQ
9695-G

A silver palladium paste designed to be used on alumina and porcelain enameled steel to be used for ground plane and buried conductor layers in multi-layer hybrid circuits. This material is fired between 625°C and 930°C.

9695-G Datasheet Add 9695-G to RFQ
9695-P

A silver palladium conductor designed for use in potentiometer applications. This material can be fired as low at 625°C on alumina.

9695-P Datasheet Add 9695-P to RFQ
C-964-A

A silver palladium paste designed for termination on the ESL R-300 series resistors. This material is fired on alumina at 850°C.

C-964-A Datasheet Add C-964-A to RFQ
C-964-G

A RoHS compliant silver palladium paste with excellent solderability. This material is fired on alumina at 850°C.

C-964-G Datasheet Add C-964-G to RFQ
9693-G

A RoHS compliant silver palladium paste that is fired at 850C on alumina.

9693-G Datasheet Add 9693-G to RFQ
9693-S-A

A silver palladium paste that is designed for applications requiring high speed printing. This material is fired at 850°C on alumina.

9693-S-A Datasheet Add 9693-S-A to RFQ
9635-HG

A RoHS compliant silver palladium paste with a 6:1 ratio. This material is fired at 850°C on alumina.

9635-HG Datasheet Add 9635-HG to RFQ
9647

A RoHS compliant silver palladium paste with a 3:1 ratio designed for applications needing large diameter aluminum wire bonding. This material is fired at 850°C on alumina.

9647 Datasheet Add 9647 to RFQ
9695

A silver palladium paste with a 20:1 ratio designed for applications requiring a low firing temperature including porcelain enameled steel (PES). This material is fired as low as 625°C.

9695 Datasheet Add 9695 to RFQ
9633-G

A silver palladium paste with a 2:1 ratio for applications that require aggressive soldering conditions. This material is fired at 850°C on alumina.

9633-G Datasheet Add 9633-G to RFQ
9635-B

A silver palladium paste with a 3:1 ratio. This material is fired at 850°C on alumina.

9635-B Datasheet Add 9635-B to RFQ
9635-H

A silver palladium paste with a 6:1 ratio. This material is fired at 850°C on alumina.

9635-H Datasheet Add 9635-H to RFQ
9638

A silver palladium paste with a 3:1 ratio designed for use as an electrode for ESL4113-H and 4117 capacitors. This material is fired on alumina at 980°C.

9638 Datasheet Add 9638 to RFQ
9912-THP

A mixed bonded silver paste designed for through hole via printing on 96% alumina. This material is fired at 850°C.

9912-THP Datasheet Add 9912-THP to RFQ
9912-A

A mixed bonded silver paste designed to be used on porcelain enameled steel, alumina and Beryllia for use in chip resistors, potentiometers, hybrid circuits, and heater elements. This material is fired between 625°C and 930°C.

9912-A Datasheet Add 9912-A to RFQ
9912-F

A silver paste designed for use as a resistor termination with use with ESL resistors. This material is fired on alumina at 850°C.

9912-F Datasheet Add 9912-F to RFQ
9912-G

A RoHS compliant silver paste designed to be fired at 850°C on alumina.

9912-G Datasheet Add 9912-G to RFQ
9912-K

A RoHS compliant silver paste designed with a wide processing temperature for use on porcelain enameled steel, alumina and Beryllia. This material is fired between 625°C and 930°C depending on the substrate.

9912-K Datasheet Add 9912-K to RFQ
9912-K FL

A RoHS compliant silver paste designed with fine line printing capability for use on porcelain enameled steel, alumina and Beryllia. This material is fired between 625°C and 930°C depending on the substrate.

9912-K FL Datasheet Add 9912-K FL to RFQ
9912-K Thick Print

A RoHS compliant mix bonded silver paste designed for creating thick silver prints. This material is fired between 850°C and 930°C on alumina.

9912-K Thick Print Datasheet Add 9912-K Thick Print to RFQ
9916

A silver paste designed for use as a capacitor electrode with ESL D-4150 Series and D-4200-C Series of dielectrics. This material is fired at 900°C on alumina.

9916 Datasheet Add 9916 to RFQ
9990

A fritless silver paste designed for good adhesion to 96% alumina, 99.5% alumina, beryllia and ferrite. This material is fired at 900°C.

9990 Datasheet Add 9990 to RFQ
1901-SB

Silver filled, flexible resin material that cures at 150°C for touch panels and flexible solar cells. The after curing the polymer material is resistant to attack from organic solvents.

1901-SB Datasheet Add 1901-SB to RFQ
1107-S

A silver filled, thermosetting, conductive polymer that cures at 150°C. It can be plated using electroless nickel to enhance solderability.

1107-S Datasheet Add 1107-S to RFQ
1109-S

A silver filled, thermosetting, conductive polymer that cures at 150°C that is used as a polymer resistor termination. It can be plated using electroless nickel to enhance solderability.

1109-S Datasheet Add 1109-S to RFQ
1901-S

A silver filled, flexible resin material that cures at 150°C for touch panels and flexible solar cells.

1901-S Datasheet Add 1901-S to RFQ
1120

A silver filled, resin compound that cures at 150°C for printing conductors on ridged and flexible substrates.

1120 Datasheet Add 1120 to RFQ
5837

A platinum gold paste designed for resistor terminations in hybrid circuits. This material has excellent bond strength and is fired with alumina at 850°C.

5837 Datasheet Add 5837 to RFQ
5867

A platinum, palladium, gold paste designed for resistor terminations with excellent bond strength to dielectrics. This material is fired on alumina between 850°C and 930°C.

5867 Datasheet Add 5867 to RFQ
5800-B

A platinum gold paste designed for applications with multiple re-fires (>30). This material has excellent solder leach resistance and is fired with alumina between 850°C and 980°C.

5800-B Datasheet Add 5800-B to RFQ
5837-A

A platinum gold paste with excellent solder leach resistance. This material is fired on 4905-C at 850°C.

5837-A Datasheet Add 5837-A to RFQ
5837-G

A platinum gold paste designed for multiple firings. This material is fired on alumina at 850°C. When printed on 4917, this material can also be used on Beryllia.

5837-G Datasheet Add 5837-G to RFQ
5545-LS

A fritted platinum conductor designed for use as a heating element. This material is the thin printing version of 5545 and can be fired between 850°C and 1300°C alumina or zirconia to a thickness of 4 microns.

5545-LS Datasheet Add 5545-LS to RFQ
5559-B

A platinum paste designed to be co-fired with high temperature ceramic tape to create a high resistance heater. This material is co-fired with alumina or zirconia between 1450°C to 1550°C.

5559-B Datasheet Add 5559-B to RFQ
5575

A platinum paste designed to be co-fired with high temperature ceramic tape to create a via conductors for planar oxygen sensors. This material is co-fired with alumina or zirconia between 1450°C and 1550°C.

5575 Datasheet Add 5575 to RFQ
5541-A

A RoHS compliant platinum conductor. This material is fired at 1350°C on alumina.

5541-A Datasheet Add 5541-A to RFQ
5571

A platinum paste designed to be co-fired with high temperature ceramic tape to create a resistance heater in planar oxygen sensors. This material is co-fired with alumina or zirconia between 1450°C and 1550°C.

5571 Datasheet Add 5571 to RFQ
5574

A platinum paste designed to be co-fired with high temperature ceramic tape to create a conductor leads for planar oxygen sensors. This material is co-fired with alumina or zirconia between 1450°C and 1550°C.

5574 Datasheet Add 5574 to RFQ
5545

A fritted platinum conductor designed for use as a resistance heating element. This material can be fired between 850°C and 1300°C on alumina or zirconia.

5545 Datasheet Add 5545 to RFQ
5544

A fritted platinum conductor for use in resistance temperature detectors (RTDs) and resistance heater applications. This material can be fired between 980°C and 1300°C on alumina.

5544 Datasheet Add 5544 to RFQ
5051

A thin printing metallo-organic platinum designed for resistance temperature detectors (RTDs) and other applications. This material fires at 850°C on alumina or glazed ceramic to a fired thickness of 1 micron or less.

5051 Datasheet Add 5051 to RFQ
8886-A

An alloyed gold paste for creating dense gold films between 1-3 microns that can be etched and gold wire bonded. This material is fired on high temperature underglazes at 850°C.

8886-A Datasheet Add 8886-A to RFQ
8884-G

A RoHS compliant, fritless gold paste designed for applications requiring gold wire bonding. This material shows excellent performance on alumina or on 4920 when fired at 850*C.

8884-G Datasheet Add 8884-G to RFQ
8846-GH

A RoHS compliant alloyed gold paste for large diameter gold and aluminum wire bonding. This material is fired on alumina at 850°C.

8846-GH Datasheet Add 8846-GH to RFQ
8880-G

A RoHS compliant fritless gold paste, for creating dense gold films between 10-15 microns that can be etched and gold wire bonded. This material is fired on alumina at 980°C.

8880-G Datasheet Add 8880-G to RFQ
8881-B

A fritless gold paste for creating dense gold films between 6-8 microns that can be etched and gold wire bonded. This material is fired on alumina at 850°C.

8881-B Datasheet Add 8881-B to RFQ
8881-BA

An alloyed fritless gold paste for creating dense gold films between 6-8 microns that can be etched and aluminum wire bonded. This material is fired on alumina at 850°C.

8881-BA Datasheet Add 8881-BA to RFQ
8884-A

An alloyed fritless gold paste with designed for applications on alumina and Beryllia that require large diameter (250 micron) aluminum wire bonding. This material fires between 950°C and 980°C.

8884-A Datasheet Add 8884-A to RFQ
8836-F

A gold paste, designed for applications needing thin gold films (6-9 microns), wire bonding and total firing cycles below 15 minutes. This material is fired on alumina at 850°C.

8836-F Datasheet Add 8836-F to RFQ
8837-G

A gold paste for creating dense gold films between 2-6 microns that can be etched and gold wire bonded. This material is fired on alumina at 850°C.

8837-G Datasheet Add 8837-G to RFQ
8838-VF

A high solids gold conductor designed for hermetic via posts in alumina substrates. This material is fired at 850°C.

8838-VF Datasheet Add 8838-VF to RFQ
8844-G

A RoHS compliant mixed bonded gold paste for gold wire bonding. This material is fired on alumina at 850*C.

8844-G Datasheet Add 8844-G to RFQ
8846-G

A RoHS compliant alloyed gold paste for gold and aluminum wire bonding. This material is fired on alumina at 850°C.

8846-G Datasheet Add 8846-G to RFQ
8836-A

An alloyed mixed bonded gold paste designed for applications needing thin gold films (6-9 microns) and aluminum wire bonding. This material is fired on alumina at 850°C.

8836-A Datasheet Add 8836-A to RFQ
8835-VF-G

A high solids gold conductor designed for via posts in multi-layer circuits requiring multiple re-fires. This material is fired between 850°C and 1000°C.

8835-VF-G Datasheet Add 8835-VF-G to RFQ
8835 (520C)

A gold paste designed to be used for applications requiring a low firing temperature including soda-lime glass. This material is fired at 520°C

8835 (520C) Datasheet Add 8835 (520C) to RFQ
8835-1A

An alloyed gold paste designed for wire bonding with aluminum wire. This material is fired on alumina at 850°C.

8835-1A Datasheet Add 8835-1A to RFQ
8835-1B

An gold paste designed for wire bonding with gold wire. This material is fired on alumina at 850°C.

8835-1B Datasheet Add 8835-1B to RFQ
8081-A

A metallo-organic gold paste that is designed to produce fired gold films that are less than 1 micron in fired thickness. This material can be fired between 625°C and 850°C on alumina.

8081-A Datasheet Add 8081-A to RFQ
8081-C

A RoHS compliant metallo-organic gold paste that is designed to produce fired gold films that are less than 1 micron in fired thickness. This material can be fired between 625°C and 850°C on alumina.

8081-C Datasheet Add 8081-C to RFQ
8884

A fritless gold paste with designed for applications on alumina and Beryllia that require gold wire bonding. This material is fired between 950°C and 980°C.

8884 Datasheet Add 8884 to RFQ
8886

A gold paste for creating dense gold films between 1-3 microns that can be etched and gold wire bonded. This material is fired on high temperature underglazes at 850°C.

8886 Datasheet Add 8886 to RFQ
8836

A mixed bonded gold paste designed for applications needing thin gold films (6-9 microns) and gold wire bonding. This material is fired on alumina at 850°C.

8836 Datasheet Add 8836 to RFQ
8844

A fritless gold paste for gold wire bonding. This material is fired on alumina at 850°C.

8844 Datasheet Add 8844 to RFQ
8847

A gold paste for creating dense gold films between 1-3 microns that can be etched and gold wire bonded. This material is fired on alumina at 850°C.

8847 Datasheet Add 8847 to RFQ
8880

A fritless gold paste, for creating dense gold films between 10-15 microns that can be etched and gold wire bonded. This material is fired on alumina at 980°C.

8880 Datasheet Add 8880 to RFQ
2312-G

A RoHS compliant copper conductor paste. This material is fired on Alumina or Aluminum Nitride between 900°C and 980°C.

2312-G Datasheet Add 2312-G to RFQ
2312-A-3

A copper paste designed to print thick (70 microns) to conduct higher currents. This material is fired between 900°C and 980°C in nitrogen.

2312-A-3 Datasheet Add 2312-A-3 to RFQ
41020-T

A RoHS compliant, low temperature ceramic transfer tape (LTTT) designed to be laminated to an alumina substrate to apply a thick layer of dielectric glass (k=7.5). This material is co-fired with silver or gold pastes between 850°C and 875°C to give a dense body.

41020-T Datasheet Add 41020-T to RFQ
41110-T

A low temperature ceramic transfer tape (LTTT) designed to be laminated to an alumina substrate with a dielectric constant (k) of 5. This material is co-fired with silver or gold pastes between 850°C and 875°C to give a dense body.

41110-T Datasheet Add 41110-T to RFQ
41010-T

A low temperature ceramic transfer tape (LTTT) designed to be laminated to an alumina substrate to apply a thick layer of dielectric glass (k=7.5). This material is co-fired with silver or gold pastes between 850°C and 875°C to give a dense body.

41010-T Datasheet Add 41010-T to RFQ